The Prolimit Raider unisex boot is our most universal boot. The glued and blind-stitched seams keep the water from getting in and the 5.0mm neoprene makes sure your feet stay warm. The reinforced heel panels make sure you have the stability and support that you need during your session on the water. The difference between the RT and ST is that this boot has an internal split toe, the split toe allows you to have more balance and control. GBS seams (glued and blind stitched) OCL (Orthopedic controlled last) 3D split toe last Heel webbing loop for easy access DCS (Direct controlled last) Heel lock reinforcement Water based glue, anti-allergic, environment friendly Airflex 350+ limestone neoprene For Sizechart click here

HIGHLIGHTS Switch effortlessly between disciplines - no tools required. Intuitive single-action reload Uncompromised direct performance Think Less, Feel More Switch effortlessly between disciplines with the Toolless Interloop, our no-tools required modular harness loop replacement system. The Navigator Control System connects you intuitively to your kite, using industry-leading SK99 Dyneema lines from Liros for precise performance. The 2022 Connect Quick Release and leash now complies with ISO Standard 21853:2020. Faster, safer release and intuitive single-action reload in all conditions. Available in three sizes, the refined ergonomic design offers durability, comfort and tactile control. Knowing your kite's position just became second nature. Switch effortlessly between disciplines - no tools required. Simply push, twist, pull, lock and go. The Toolless InterLoops are made from optimised TPU material for flex and durability, with a more rigid freeride security finger to prevent unexpected unhooking. Intuitive single-action reload Security and performance in all conditions. Our patented and ISO-approved Connect Quick Release (QR) raises the bar in kite control system safety. Uncompromised direct performance Our industry-leading 100% Dyneema SK99 flying lines are strong, thinner profile and pre-stretched for less parasitic drag and uncompromised direct performance. With 88m of flying lines in the air, you can really feel the difference thinner line creates. Fine-tune the turning speed of your kite The Navigator is available in three adjustable bar length sizes: 38-43cm, 40-45cm and 45-50cm.  DETAILS TOOLLESS INTERLOOP SYSTEM WITH LOCKGUARD Switch effortlessly between disciplines - no tools required. Simply push, twist, pull, lock and go. Loops are made from optimised TPU material for flex and durability, with a more rigid freeride security finger to prevent unexpected unhooking. Flexible LockGuard safety ring prevents accidental release of your interloop. SOFT EVA BAR ENDS WITH RETRACTABLE LINE WINDERS The positive buoyancy bar ends with integrated line winder bungees are injection moulded in one piece with no-glue seams for long-lasting quality. The bar ends ensure nothing hard comes in touch with you or your board, float the entire bar, and also contain the concealed rear line adjustment. Even the best quality lines shrink over time, so after a month, we recommend you check your lines are all even and drop them to the bottom knot. It’s easy and takes only a minute to make the change. PROTECTIVE PU-COVERED LEADER LINES To help prevent line abrasion from uncovered lines against your skin, we've used colour-coded PU tubing covers. The covers also help them remain rigid and out of the way when the flying lines aren't under tension. ADJUSTABLE CLEATED TRIM SYSTEM Provides industry-proven line-adjustment when needed. The cleat base has been designed with circular geometry for consistent bar spin. In overpowered conditions the cleat allows you to shorten your front lines and remain in a comfortable body position. LIGHTWEIGHT OVER-MOLDED TRIM HANDLE WITH DYNEEMA LINES Easy to reach moulded trim handle doesn't hurt when it hits you. Made from Nylon/EVA for strength with a textured soft-touch grip. Top-quality German-made extremely high wear Dyneema depower and trim line with a special impregnation coating for resistance to abrasion. DURABLE COVERED MAINLINE, WITH CUSTOMISED TPU TUBING Symmetric multibore landing line channel allows the landing line/flying line to pass through without snagging, regardless of the orientation when deploying or reloading. Crafted from a patented material specifically formulated for high abrasion flexible applications. CUSTOM LOW-FRICTION SPINNING HANDLE Unspin your front lines easily. ADJUSTABLE LENGTH FLYING LINES 22M (12M + 10M) 22m lines have a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of flying line and 12m lines are ideal for schools to teach with and for foil racing. 8m and 6m line extensions are available as an accessory for wave riding or tighter kiteloops. KOOK-PROOF FLYING LINE CONNECTORS Ensure you always set up your flying lines correctly. Designed to be exactly the same length so you can easily change the front (knotted end) and rear (lark's head loop) connectors to match most other manufacturers' kite configurations. Please familiarise yourself with the safety procedures and trimming instructions outlined in your kite’s user manual. PREMIUM QUICK RELEASE LEASH The Navigator Control System is supplied with a premium quality freeride Leash with a high load carabiner, soft neoprene cover and non-abrasive elasticised webbing. The leash QR mechanism has been modified to ensure correct orientation is maintained when released for consistent, safe release and reload. INTUITIVE SINGLE-ACTION RELOAD Security and performance in all conditions. Our patented and ISO-approved Connect Quick Release (QR) raises the bar in kite control system safety. The red QR handle has been ergonomically designed to fit in your hand comfortably for an industry-standard push away release. All loaded or running surfaces feature highly polished 316 stainless steel and low-friction components. The larger diameter bungee inside the QR helps reduce accidental release. INDUSTRY-LEADING 100% DYNEEMA SK99 FLYING LINES Strong, thinner profile, pre-stretched flying lines mean less parasitic drag and uncompromised direct performance. With 88m of flying lines in the air, you can really feel the difference thinner line creates. Our latest technology high-load LIROS DC-401 Pro flying lines have extreme stretch resistance and minimal diameter (1.6mm). THREE ADJUSTABLE BAR LENGTH OPTIONS Fine tune the turning speed of your kite. The Navigator is available in three sizes 50-55cm (L), 45-50cm (M) and 38-43cm (S). To extend/retract bar length simply pull out cassettes on the bar-ends, rotate 180 degrees and snap back into place. OMNIDIRECTIONAL GRIP WITH OFFSET FINGER BAR AND COLOUR-CODED COMPONENTS Feel more connected. The Navigator is designed with a comfortable ergonomic grip for a natural grasp and the tactile offset finger bar is slightly oval, so you can feel when the control bar is orientated correctly. The colour-coded bar ends, leader tubing and line retainer pull tabs give a nod to our sailing heritage, port (red) and starboard (green). SPINNING LEASH ATTACHMENT RING Our oval-shaped leash pin ring is elongated for easier fastening of the leash carabiner, and spins to help prevent your landing line from twisting. DYNEEMA TRIM LINE Top-quality German-made extremely high wear Dyneema depower and trim lines, with special impregnation coating for resistance to abrasion.    

FREERIDE SIZES: 2M / 2.5M / 3M / 3.5M / 4M / 4.5M / 5M / 6M / 7M / 8M With the sport evolving at such an incredible rate, you need a wing that matches this evolution and takes us into the next generation of Wing Foiling. Known for it’s incredible range and light feel, the Vision is back in 04.  Increased low end power in the smaller sizes, refined airflow across the board, and the lightest weight light wind wings in the market, makes the new Vision the most all around wing out there. Tall or small, crusing or wave riding, light winds or storm chasing.  The Vision is the perfect addition to your wing quiver. (Leash sold separately)  High rigidity LE Inflatable, High reactive Dihedral with high lift profile, Medium AR and convex strut. FEATURES: NEW:  Convex strut for improved frame stiffness and extended TE canopy support NEW:  graduated TE load distribution panel for improved efficiency of the loaded sail NEW:  refined airfoil flow NEW:  Spanwise load path panel layout NEW:  Fully moulded composite widespan handles with indexing mounting interface NEW:  Full rigid performance LE handle with anti-abrasion patch NEW:  2 ply frame elbow panels for improved arc rigidity NEW:  Fine tuned size progressive wing tip twist for forgiving sheeting NEW:  Micro eva batten for improved TE stability Hight Tenacity Dacron for enhanced dihedral stability and improved handling characteristics Heavy duty UHMPWE reinforced closing seam construction Nano Ripstop Canopy, the benchmark in durability, stability and responsiveness Sprint 3.0 and deflate valve Durable TPU bumpers 2-ply high rigidity centre load reinforcement for added arc and dihedral stability Refined convex dihedral for power-to-strength ratio High dihedral for great upwind stability, reactive handling and a balanced flex KEY FEATURES HIGH DIHEDRAL The Vision has the highest amount of Dihedral in the Cabrinha range which helps greatly in upwind stability and reactive handling. FULL AIRFOIL The full centre section airfoil increases the low end power helping you get up and going with minimal effort. SIZE MATTERS The small sizes excel in high winds due to the reactive sheeting, where are as the larger 6/7/8m were designed with lighter winds in mind to get you up and riding when most are sitting on the beach. CONVEX STRUT The Convex support strut on the Mantis V3 provides a stiffer and more reactive connection between the rider and wing. 20/20 VISION A refined window layout, made from weather resistant TPU provides increased visibility when riding. TIP TWIST Progressive tip twist as the sizing increases in the Vision range helps keep sheeting relative and responsive no matter what size wing you ride. NANO RIPSTOP Nano Ripstop is a 55 g/m2 material with a 3mm double rip stop pattern. This micro rip stop material in unison with a newly developed coating, has given us a 2X increase in the canopy’s tear strength. A smaller rip stop pattern increases the amount of “cells” in any given panel. KEYLOCK ANGLED HANDLE ATTACHMENTS Indexing attachment points lock down the composite handles eliminating any rotation at each connection point. The culmination is the most rigid, direct handle design to date. 2 X SPRINT Two sprint valves connection the Stiff Strut to the Leading edge allow for increased airflow to aid in both inflating and pack down. TE LOAD DISTRIBUTOR The TE load distributor increases wing durability while robustly helping distribute wing tension throughout the trailing edge. The abrasive material stops scuffing while the wing rests on land. PURE IMPULSE FRONT HANDLE V2 Expanding on the composite handle design, the all new Pure Impulse Front Handle gives the strongest, most direct LE control and handling in the market. Minute wrist control translates directly into wing input, allowing you to put the wing. 20/20 VISION The new window positioning on the Mantis and Vision wings allows for increased range of visibility not only ahead, but also behind you, to aid during riding and transitions. CONVEX STRUT The new convex strut provides not only increased strength and stiffness, but also allows for a longer attachment between strut and canopy giving a clean fully tensioned profile at all angles of flight.  

The Prolimit neoprene hood mesh protects your head during cold sessions on the water. The neoprene of this hood is 2mm thick. The Prolimit neoprene hood mesh protects your head during cold sessions on the water. The neoprene of this hood is 2mm thick. Available in color black, size range S to XL. For Sizechart click here

2 mm Beanie with chinstrap so prevent loosing it durig your sessionFeatures: 2mm double lined neoprene; adjustable chinstrap